Daylight Saving Clock Changes

Overview

In the UK, when the clocks change between GMT and BST in March and October, the times on Synel T&A devices change automatically. This can result in employee clock-out times needing to be manually adjusted in Fourth's Rotas and Scheduling modules when confirming hours and completing the day. This article provides guidance on this.

Dates and Times of Clock Changes - UK

In March, the clocks go forward by one hour at 1am on the last Sunday of the month. Any employees who clock out after this time will need an hour deducted from their clock-out time.

In October the clocks go back one hour at 2am on the last Sunday of the month. Any employees who clock out after this will need an hour added to their clock-out time.

Manually Amending Times in the Rotas Module

In the Rotas module, go to Rotas > View Rotas

Search for and select the required Rota
Against 'Employee Shifts' select the required day Fig.1 - Selecting a day on the rota
Select the time and attendance data (the clock icon) for the relevant employee
Use the 'Override actual times' and update the Actual Time section to add or deduct the hour
Save&Close and then repeat as required for other employees Fig.2 - Updating actual clock-in/clock-out times in the Rotas module

Manually Amending Times in Scheduling

If using the Scheduling module, follow these steps:

From the Scheduling homepage, go to the Schedule tab
Select the T&A clock icon for the relevant day Fig.3 - Selecting a T&A clock icon in Scheduling
For any employees affected in the Actions column, you can either keep the scheduled time or manually override to enter the correct times. Fig.4 - Updating actual clock-in/clock-out times in Scheduling

Please note - If an EPOS provider is used for time and attendance, the above process within the Rota and Scheduling modules will be the same if the time on the EPOS device changes automatically. Please check with the EPOS provider to confirm how/if the time will change automatically.