Contact support

Access Control

Access Control Event Types by Device

Synergy

Apart from generic event types, please see below specific Event types by device that we currently support within Synergy Workforce

I.e. you can enable them under Event Types so that they are visible within Guard Screen

SALTO

  • 100 SALTO - Open with inside handle
  • 101 SALTO - Open with card, PIN or card+PIN
  • 102 SALTO - Open from Host
  • 103 SALTO - Start Office Mode with card, PIN or card+PIN
  • 104 SALTO - End Office Mode with card, PIN or card+PIN
  • 105 SALTO - Intrusion alarm
  • 106 SALTO - Tamper alarm
  • 107 SALTO - Door Left Open alarm
  • 108 SALTO - End of Door Left Open alarm
  • 109 SALTO - End of Intrusion alarm
  • 110 SALTO - End of Tamper alarm
  • 111 SALTO - The communication with the lock has been lost
  • 112 SALTO - The communication with the lock has been re-established
  • 113 SALTO - Card, PIN or card+PIN rejected
  • 114 SALTO - Low battery warning

BioStar events

  • 920 Forced to Open
  • 932 Held Door Open
  • 933 Door Opened
  • 934 Door Closed
  • 935 Door Locked
  • 936 Door Unlocked

Sy400 events

  • 411 Sensor 1 Activated (SY400 Only)
  • 412 Sensor 2 Activated (SY400 Only)
  • 413 Tamper Activated (SY400 Only)
  • 414 Sensor 1 Open Too Long (SY400 Only)
  • 415 Sensor 2 Open Too Long (SY400 Only)
  • 416 Sensor 1 Close After Too Long (SY400 Only)
  • 417 Sensor 2 Close After Too Long (SY400 Only)
  • 418 External Sensor Activated (SY400)