SY910: Network Requirements and Offline Clocks (for IT)
This is for the IT team at a site with SY910 Synergy Face clocks. It covers what the clocks need from the network and what to check when one goes offline.
What the clock needs
- A wired network connection (or Wi-Fi) with access to the internet. The clock connects out to the Synergy Face server address Synel gives you. Nothing needs to connect in to the clock, so no port forwarding is needed.
- Outbound HTTPS (TCP port 443). Clocks still on the older webservice use TCP port 3636 instead.
- A fixed IP address is best. DHCP works, but a lease change or a network change can break the clock's connection.
- No SSL inspection, IPS or web filtering on the clock's traffic. The clock uses an older TLS setup than a web browser, so security devices often treat it differently. Allow its traffic straight through.
Finding the clock on your network
The clock's wired MAC address starts 00:0C:5B. You can read it on the clock in Menu > 6 System Info > 2 Product Info. If the clock is moved between wired and Wi-Fi, its MAC address changes and Synel has to update the clock's record, so let us know first. See Using SY910 Synergy Face on Wifi.
When a clock goes offline
- The network icon at the top left of the screen shows a red cross when the clock can't reach the server.
- Clockings made while offline are kept on the clock and sent when it reconnects. Nothing is lost. Don't reset or clear the clock.
- If you need to reboot it, export its records to a USB stick first. See SY910: Exporting Clocking Records to a USB Stick.
What to check
- Can you see the clock on your network by its MAC address, and what IP address does it have? If you can't see it, the problem is between the clock and your network: the cable, the network point, the switch port or the Wi-Fi.
- Has anything changed on the network, such as a new switch, router, firewall rule or IP range? A change like this can leave the clock without its server address. Contact Synel Support to have it put back.
- Can staff open your Synergy Workforce website from the same network while the clock is offline? If they can, the internet connection and the server are fine, and something on your network is treating the clock differently. Check SSL inspection, IPS and web filtering for the clock's traffic.
- Are other Synel clocks at the same site still online? If one is, the Synel server is accepting your traffic, and the cause is local to the clock that is offline.
If you need us to check from our side, contact Synel Support with the clock's MAC address, its IP address and the time it went offline.