Contact support

Access Control

Suprema Readers: Adding and Removing People

This applies to Suprema readers managed from Synergy Workforce, listed in Maintenance > Suprema 2 Devices.

Getting someone onto a reader

A person is only sent to a reader if one of their security groups includes that reader's door. A change to their record, such as adding a security group, reaches the readers within a couple of minutes. Otherwise changes go out in the nightly sync, which starts at about 03:00.

After enrolling or re-enrolling a fingerprint in Synergy Workforce, run a manual sync for that person. A new fingerprint on its own does not start a sync, so it can sit in Synergy Workforce without reaching the readers.

Running a manual sync

Go to Maintenance > Suprema 2 Devices, choose the people and the readers, and run the sync. Each reader shows whether the sync succeeded. A reader that isn't communicating with the server fails every time. The sync also sends security groups and device settings to the selected readers.

Taking someone off the readers

  • Make them a leaver. This is what removes a person from the readers, at the latest at the next nightly sync.
  • Removing a security group does not remove them from the reader.
  • Deleting their fingerprints in Synergy Workforce does not remove them either. The nightly sync copies fingerprints held on the readers back into Synergy Workforce.
  • Someone with a leave date in the future stays on the readers until that date. From version 6.7.0 they can still get in for the whole of their leave date.